Gray Ghost

A Sky High 640-hp Ford

Dorian Reyna, owner of Power Stroke Enginuities in Houston, Texas is no stranger to Fords and going fast. He’s been drag racing for years, and has progressed from the 12s, to 11s, to 10s. After he got done making power, he decided to try something a little different for 2018. “We get a lot of lifted rides, and it looked like a lot of fun,” says Dorian. “We decided our ‘17 Ford would be the perfect fit to break into the off-road market,” says Dorian.

DW-1805-FORD-01a

DW-1805-FORD-01b

DW-1805-FORD-01c

Since his Ford was a shop truck, he decided to throw the kitchen sink at it, which is how he got in touch with Any Level Lift out of Ballston Lake, NY. “We didn’t want to build something everyone else had,” says Dorian, “…so this seemed to be the perfect fit.” The Any Level Lift kit uses hydraulically adjusted mounting points for the suspension, so that it can go from a 1-inch front, 4-inch rear drop, to a 13-inch front, 12-inch rear lift. The kit was designed with a complete steering system in addition to the lift, so the geometry doesn’t get all out of whack. “It was a fairly complex system to install,” says Dorian, “But totally worth it.”

With such an intense lift, Dorian had to make the rest of the truck look the part.  The front and rear of the F-350 had its factory bumpers replaced with off-road pieces from Fusion Bumpers, along with a light bar and light cubes from Rigid Industries. For towing, a Bulletproof Hitches 6-inch drop hitch was installed, and to get people out of the way, a Hornblasters 6 horn system was mounted with a kit from Wicked Offroad. Wheels and tires are also much larger than factory, with 40×15.50R24 inch Dakar tires mounted on 24×14-inch American Force Range wheels.

DW-1805-FORD-21

DW-1805-FORD-04
Perhaps the most impressive arrangement in the Any Level Lift kit is the front steering. Since the ride of the truck changes so drastically, the front steering links also have to be adjustable on the fly. Owner Dorian Reyna also reports custom driveshafts were added for both the front and rear axles.
DW-1805-FORD-05
The front arm of the suspension is swung all the way down, which lifts the truck. Whether lifted or lowered, dampening is provided by King Offroad coil-over shocks.
DW-1805-FORD-07
Much like the steering up front, the rear of the truck has an adjustable link setup, which keeps the rear planted to the ground on street, dirt, or rocks.
DW-1805-FORD-06
The rear suspension has the same actuating arms as the front end, and the arms also rotate the pinion angle up and down as the suspension is shifted. This keeps the driveshafts from binding up, no matter if the truck is lifted, lowered, or leveled.

Since Dorian got his start by making power, he couldn’t just add a programmer to his new project and call things done. Making an estimated 640 rear-wheel horsepower, the Ford is no slouch, and has a number of modifications aimed purely at increasing performance. Dorian started with an intake from No Limit Fabrication, which feeds into a 69mm S300 BorgWarner turbo that was mounted with a Maryland Performance Diesel swap kit. MPD also got the nod for its engine dress up kit and CCV re-route, while it was No Limit that took care of the charge air with an upgraded intercooler. While he was digging into the engine, Dorian also installed a River City Diesel Superstroker CP4 for if he wants more power in the future. The truck gets tuned through PPEI via EZ Lynk, and so far the factory transmission has held up well to 44 psi of boost and more than 600 hp.

With such a laundry list of parts you might think that Dorian’s ride is a show-only deal, but it’s not. He was more than willing to do some donuts in the desert with his unconventional lift kit “somewhere in the middle,” and he also has some hard proof after a clueless lady in a Toyota Camry pulled into him in traffic. “Luckily it was just a fender–but we really do use this thing!” Dorian comments. With such a unique truck, we’d be driving it all the time too!

DW-1805-FORD-20

DW-1805-FORD-08
Dorian went large by huge when it came to his wheel and tire choice, with 24×14-inch American Force wheels that have a special PSE Edition etching engraved into the outer lip.
DW-1805-FORD-09
Aggressive Mud Terrain tires from Dakar were installed. These 40×15.50-inch tires still have a good load range and quite a bit of sidewall–for those people who still want to drive their show trucks.
DW-1805-FORD-10
The front bumper is from Fusion Bumpers, and has been paint-matched to the truck. It also sports a cool and durable light bar from Rigid Industries.
DW-1805-FORD-11
The rear bumper on the Ford is also from Fusion, and has light cubes (also from Rigid) for ultra bright back-up lights. Since the truck’s height is adjustable, of course so is the hitch from Bulletproof Hitches.

DW-1805-FORD-25

DW-1805-FORD-12
Dorian also went big on the exhaust, for looks, and to make sure there’s no restrictions. A Flo-Pro 5-inch exhaust got the nod, which ends in a 7-inch tip.
DW-1805-FORD-15
Even after all his hard work on the exterior of the truck, Dorian wasn’t about to let a stock engine slip past. The most glaring change is the turbo piping setup from Maryland Performance Diesel, which works in conjunction with an S300 turbo to crank out an estimated 640 rear-wheel horsepower.
DW-1805-FORD-13
Side-Steps from AMP Research were cut down to fit a regular cab truck. Now instead of lowering the whole truck so passengers can get in, these simple steps will do the trick.
DW-1805-FORD-14
As if the Fusion bumper didn’t give the truck an aggressive enough look, a Ram-Air hood from RK Sport was added for looks, and to improve airflow in and out of the engine bay.

DW-1805-FORD-26

DW-1805-FORD-16
The first step to improving the 6.7L engine’s airflow was the addition of an intake, filter, and pre-filter from No Limit Diesel Fabrication.
DW-1805-FORD-17
The turbocharger that Dorian selected for the truck is a 69mm SX-E unit, which works in conjunction with a No Limit air-to-water intercooler and PPEI EZ-Lynk tuning to send an efficient 44 psi of boost to the engine.
DW-1805-FORD-18
If moving the truck up and down by more than a foot doesn’t get people’s attention, there’s always the Hornblasters train horn kit, which was sturdily mounted to the Ford with a kit from Wicked offroad.

You May Also Like

Part 2: Readers' Rides Collection

Send In Your Rides Part 2!!! After the first installment of the Readers’ Rides Collection, we decided to post part 2. These posts are excellent […]

Shell Rotella Truck Of The Month - Bloody MONEY

Michael Loya’s First Gen Dodge Packing a 1000 Horsepower Cummins This month’s Shell Rotella Truck of the Month comes from Michael Loya of Midland, Texas. […]

THE RIDES OF SEMA 2017

BIGGER, FASTER, AND LOUDER THAN LAST YEAR It’s time for our Specialty Equipment Market Association (SEMA) show coverage again; Diesel World was there in force […]

5 Powerful Lifted Fords

Nothing’s More Dependable Than A Diesel Truck This collection of trucks shows off some of the best new-gen Fords that have been featured on this […]