Duramax Filtration Fix
Cleaner Air And Fuel For Engine Longevity, Efficiency And Lowered Maintenance Costs
It’s hard to believe that it’s been more than 10 years since the GM LB7 Duramax was produced. As the first generation of the popular Duramax family, the LB7 continues to be one of the best light duty diesel engines out there. While it did have some issues with the injectors, it’s a solid platform for just about any application from the daily driver tow rig to an all-out competition truck.
If the vehicle itself has been taken care of and regular maintenance has been carried out like it should, they can be great trucks to own even at relatively high mileage. With new truck prices cresting well above $50,000, it’s becoming more and more common for owners to hang on to their high-mileage trucks and start investing a little cash here and there to improve durability and performance alike.
“Injen chassis dyno testing showed a 21 horsepower and 46 lb-ft torque improvement…”
Case in point, this 2001 Duramax shows 276,000 miles on the odometer but is in great mechanical condition and does everything the owner, a cattle rancher and rodeo man, really needs. All summer long it’ll be found hauling horses around the Rocky Mountains to rodeos on the weekends and bringing 10 tons of hay out of the field on a gooseneck during the week. So it definitely gets used and abused in just about every road and load condition imaginable. Still virtually stock under the hood, it gets the job done.
There are, however, a few aftermarket parts that can be installed to help performance and aid in air and fuel filtration to extend the life of that tired LB7. The simplest modifications are usually the first to go on, but can be the most effective. The Evolution air induction system from Injen Technology along with a high-flow Turbo Intake Horn from Deviant Race Parts (DRP) reduce intake restriction to improve throttle response and performance while getting cleaner air to the turbo. And on the fuel side of things, converting over to a Cat Fuel Filter Adaptor kit, also from DRP, can help reduce maintenance costs while improving fuel filtration.
EVOLUTION INTAKE
Injen Technology has been a driving force in the gas and tuner markets for years, but has recently jumped head first into the diesel market with their Evolution air induction systems designed specifically for Duramax, Power Stroke and Cummins applications. The sealed injection-molded plastic boxes fit the engine compartment perfectly while keeping hot under-hood temperatures from reaching the filter, making it a true “cold air intake.” The high-flow SuperNano-Web filters are dry filters that flow more air than stock while being easy to clean with compressed air. No more washing, waiting overnight for it to dry, and re-oiling as required when it’s time to service the filter.
Along with better flow and cool dense air, the cleanable filter can cut long-term maintenance costs as you’ll never have to buy another filter again; just remove the conical filter and blow it out with low-pressure compressed air and you’re back up and running again. On the LB7 application, Injen chassis dyno testing showed a 21-horsepower and 46 lb-ft torque improvement (43 hp/83 lb-ft on 2008-2010 LMM Duramax) so not only will you get better airflow and filtration to that hungry turbocharger, you can expect and modest increase in performance as well.
DRP TURBO INTAKE ELBOW
With a better air box under the hood, the last bottleneck in the intake system is the factory turbo intake horn that connects the air box to the turbocharger. The factory cast aluminum piece has a large 72mm inlet diameter but necks down to just 61mm at the turbo compressor flange. To reduce restriction before the turbo, Deviant Race Parts (DRP) offers an inexpensive high-flow mandrel-bent turbo intake horn that maintains that large 72mm diameter throughout.
The new DRP horn will help improve turbo spool-up, throttle response and overall turbo efficiency. DRP tells us you can expect a moderate 5-10 hp increase depending on your truck’s current modifications. Installation can be a bit of a challenge due to the location of the three mounting bolts and the tight working space, but with the right combination of extensions and universal joints on a ¼-inch ratchet it’s possible.
DRP CAT FUEL FILTER ADAPTOR
The factory fuel filter on the GM Duramax located on the passenger side of the engine works pretty well at keeping clean fuel flowing to the CP3 pump and injectors, but expensive replacement filters can be tough pills to swallow when it comes time to change it. As the miles add up and the filter starts getting dirty, flow through the filter is reduced and engine performance and fuel mileage can be affected, sometimes bad enough to throw a check engine light that creates a reduced speed or “limp” mode.
The factory fuel filter on the GM Duramax located on the passenger side of the engine works pretty well at keeping clean fuel flowing to the CP3 pump and injectors, but expensive replacement filters can be tough pills to swallow when it comes time to change it.
The DRP Cat Filter Adaptor kit for 2001-2010 Duramax is a great way to reduce maintenance costs and improve flow to the engine, while getting better filtration at the same time. With just a $20 fuel filter to be changed, there will no longer be reason to avoid regular filter changes (8,000-12,000 miles). The 1R-0750 Caterpillar filter will filter down to 2 microns, which is much better than the stock 8-10 microns. Better filtration will reduce particle size getting to your pump and injectors, hopefully extending their life even further. Best of all, the filter Adaptor threads right onto the stock filter base and includes a spacer that moves the filter away from the engine to make changing them even easier. DW
Sources:
Injen Technology
909-839-0706
www.Injen.com
Deviant Race Parts
208-719-0112
www.DeviantRaceParts.com
